Car Paint Issues and How to Fix Them

Done at Home

Car paint issues are a headache for both shop owners and car enthusiasts. Due to the need to repaint repairs or an entire car, they can be pricey issues. The good news is that they can be avoided with adequate planning and practice. The good news is that the majority of them are also repairable.

Here are some of the most prevalent paint issues in cars, as well as how to avoid and remedy them.

Bubbling Car Paint or Fish Eye

Fish Eye: is a common blunder encountered by many body shops. It’s a phrase for automotive paint bubbling that occurs as a result of improper surface prep and cleaning before to painting. If a car’s surface isn’t clean, the paint won’t bind properly and will bubble as a result.

How to avoid it: Cleaning and prepping the car thoroughly before painting it is the best approach to avoid fish eye. To remove signs of oil, use a grease remover and sand the car well before painting.

How to cure it: Sanding and repainting the affected area usually fixes fish eye. There are various fish eye remover products, such as the Marson Smoothie II, on the market.

Orange Peel: When a spray gun sprays paint unevenly, the paint can take on an uneven appearance that resembles an orange’s texture.

How to avoid it: Using the right painting method can help you avoid orange peel. To get the greatest finish, make sure to hold the pistol at a correct distance and at a right angle. You should also check the spray gun’s pressure and make sure it’s correctly installed to achieve an even finish.

How to remedy it: Wet sanding, polishing, and repainting the afflicted area are usually the only options for repairing orange peel.

Fading car paint: Due to exposure to the sun and other conditions, a vehicle’s finish may fade over time.

How to avoid it: Keeping up with vehicle washes, in addition to parking in a garage or carport, may do wonders for a car’s finish. Make careful to wax on a regular basis to preserve as much color as possible.

How to cure it: To restore faded car paint, use a clay bar to remove dirt and oxidation,  then polish the surface to restore the sheen.

Paint color mismatch: You thought you have the color right, but closer inspection reveals that it’s slightly off. So, how do you go about it?

How to stay away from it: Making ensuring the paint you buy is factory matched to the car is a simple solution for mismatched paint. Look inside the driver’s side door jamb for the vehicle’s color code, and then order paint that matches it.

IMPORTANT: Due to natural fading, a factory match color may need to be changed to match the worn paint of the vehicle being repaired in some cases. When painting a full car, this is usually not an issue.

Color matching tools are inexpensive and may help you save a lot of money by ensuring an accurate match before you paint.

How to remedy it: A mismatched paint job can only be fixed by repainting the affected area with a factory-matched color.

Bleeding: It’s really aggravating to paint over a finish just to have the original color bleed and show through. Fortunately, if you take the proper steps, you can avoid it.

How to avoid it: Before sanding, properly clean the surface to prevent bleeding. If you plan to paint the car a color other than its original, you need take extra precautions. To prevent the previous finish from bleeding through, use a good primer/sealer before applying the new color to the vehicle. The word “quality” is important here since low-quality products yield low-quality results.

How to cure it: To stop bleeding, use a good sealer and primer to isolate the area. You can also sand down the paint and refinish it with a good primer and top coat.

Tips for Painting Your Car:

The majority of automotive paint issues can be avoided in the shop by employing high-quality paint materials and painting processes. Before attempting to paint a vehicle, keep the following common automobile paint advice in mind:

• Preparation: Before starting the painting process, make sure your paint booth is properly aired and cleaned. Prior to painting, you’ll also want to carefully clean the vehicle and eliminate any traces of rust.

• Spray gun: Before painting, make sure your spray gun is clean and adjusted to the right pressure. To get the greatest results, make sure you’re using the right nozzle and keeping the gun at the right distance.

• Materials: When painting, always use the proper hardener, thinner, and film thickness. Follow the manufacturer’s directions carefully, as they may differ between brands.

• Timing: Always adhere to the flash-off and drying durations recommended.

Because automotive paint difficulties can stymie your productivity and costs, the best approach to deal with them is to avoid them in the first place. Paint flaws can be minimized by following suitable preparation and painting techniques.

Car Paint Issues and How to Fix Them